GSX 1250 PCV maps?
+3
barry_mcki
#Tag
underwater
7 posters
Page 2 of 2
Page 2 of 2 • 
1, 2
GSX 1250 PCV maps?
underwater Fri 15 Jan 2016, 7:52 am
First topic message reminder :
Hey all!
I've been doing some winter work on my 2010 GSX1250FA. I've put a K&N filter in, drilled a 7cm diameter hole in the airbox and removed the snorkel. I've removed the secondary butterflies, and have a Leo Vince slip-on as well. I was wondering if anyone had a good map for this setup.
There are only two on the PC website, neither of which take into account the airbox mod or the butterfly removal. I don't have the cash for a Autotune at the moment, and the only local shop with a dyno wants 325 euro to tune it.
Thanks!
Hey all!
I've been doing some winter work on my 2010 GSX1250FA. I've put a K&N filter in, drilled a 7cm diameter hole in the airbox and removed the snorkel. I've removed the secondary butterflies, and have a Leo Vince slip-on as well. I was wondering if anyone had a good map for this setup.
There are only two on the PC website, neither of which take into account the airbox mod or the butterfly removal. I don't have the cash for a Autotune at the moment, and the only local shop with a dyno wants 325 euro to tune it.
Thanks!
underwater- Posts : 22
Join date : 2016-01-14
Re: GSX 1250 PCV maps?
#Tag Sun 07 Feb 2016, 8:26 pm
In a few weeks mine will be getting a 3-4000km run including a track day. I'll post up my new map then.
It'll be interesting to compare them.
It'll be interesting to compare them.
#Tag- Posts : 609
Join date : 2014-06-01
Location : Bega
Re: GSX 1250 PCV maps?
Jimcoleman Mon 08 Feb 2016, 7:42 pm
post it at the post office#Tag wrote:Just goddam it. I wish I knew as much about where the buttons are in the forum as I do about mapping.
Suggestions about the best way to send a data file through the forum plees guys.
Jimcoleman- Posts : 1179
Join date : 2011-08-03
Age : 56
Location : Merimbula , NSW
Re: GSX 1250 PCV maps?
Re-Cycled Mon 08 Feb 2016, 10:02 pm
#Tag wrote:Just goddam it. I wish I knew as much about where the buttons are in the forum as I do about mapping.
Suggestions about the best way to send a data file through the forum please guys.
You can share a file up to 25MB with the Facebook Group, if that helps.
Re-Cycled- Posts : 2227
Join date : 2009-08-20
Age : 66
Location : Newcastle -
Re: GSX 1250 PCV maps?
underwater Mon 15 Feb 2016, 5:35 pm
Sorry about the delay, but it went from +6 to -10 overnight last week, and hasn't improved at all... it looks like the cold is here to stay for a while longer.
underwater- Posts : 22
Join date : 2016-01-14
#Tag- Posts : 609
Join date : 2014-06-01
Location : Bega
Re: GSX 1250 PCV maps?
#Tag Sun 06 Mar 2016, 3:05 pm
The new map is done. Dropbox link:
[url=https://www.dropbox.com/s/atkntzc8i3pne01/GSF1250 mods no headers]https://www.dropbox.com/s/atkntzc8i3pne01/GSF1250%20mods%20no%20headers%20Autotune.pvm?dl=0[/url]
Screenshot:
" />
To confirm all the stuff:
GSF1250SA K7. Two Brothers end can. K&N filter. O2 eliminator. Secondary throttle plates removed and resistor fitted. PAIR blockoff. TRE fitted. 120,000km.
Mapped with Autotune 200. Set to single gear (5th)/all cylinders.
Mapped on 4,000km trip involving city commuting, extensive highway cruise, 500km twisty mountain roads. 1 track day (Phillip Island which is a very high speed track with a lot of time on balanced throttle, anything but a stop go track). So hopefully got plenty of sampling time over all cells.
While mapping ambient temperatures were high: 30 to 40 degrees Centigrade.
I will be very interested in the comparison to yours, underwater. If they are comparable we might get 2WA to sticky it as I've never seen a map for this common configuration anywhere.
Dekenai, did you have aftermarket headers when yours was mapped? If not, could you check to see how close this map is to yours?
[url=https://www.dropbox.com/s/atkntzc8i3pne01/GSF1250 mods no headers]https://www.dropbox.com/s/atkntzc8i3pne01/GSF1250%20mods%20no%20headers%20Autotune.pvm?dl=0[/url]
Screenshot:
" />To confirm all the stuff:
GSF1250SA K7. Two Brothers end can. K&N filter. O2 eliminator. Secondary throttle plates removed and resistor fitted. PAIR blockoff. TRE fitted. 120,000km.
Mapped with Autotune 200. Set to single gear (5th)/all cylinders.
Mapped on 4,000km trip involving city commuting, extensive highway cruise, 500km twisty mountain roads. 1 track day (Phillip Island which is a very high speed track with a lot of time on balanced throttle, anything but a stop go track). So hopefully got plenty of sampling time over all cells.
While mapping ambient temperatures were high: 30 to 40 degrees Centigrade.
I will be very interested in the comparison to yours, underwater. If they are comparable we might get 2WA to sticky it as I've never seen a map for this common configuration anywhere.
Dekenai, did you have aftermarket headers when yours was mapped? If not, could you check to see how close this map is to yours?
#Tag- Posts : 609
Join date : 2014-06-01
Location : Bega
Page 2 of 2 • 1, 2
Similar topics» Bandit 1250 Maps
» trading fuel maps
» bandit 1250 vs. GSX 1250 FA
» TRE 1250 Thoughts
» 1250 Air Box Lid Question
» trading fuel maps
» bandit 1250 vs. GSX 1250 FA
» TRE 1250 Thoughts
» 1250 Air Box Lid Question
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum