Helmet lock Wires

If you too think they are useless, and one would be better than two, and none would
be better again. This is the extraction tool best for the job . Forget the hacksaw
a couple of bends with pliers and they snap off nice and close to the frame .P.O.P
WARNING : Read the rest of this thread if you are tempted to do this mod before amputation .

I hope to buy a helmet one day that fits these things

haha gus i think your bike will turn into something else soon with all your modifications

Easyer to use and buy a $5 cable lock.

+ 1

Don't those suckers hold the seat down as well?

Kaupy1962 wrote:Don't those suckers hold the seat down as well?

was thinking that too

Kaupy1962 wrote:Don't those suckers hold the seat down as well?

Whoaa! Where did Gus go???

Computer problem and NO well maybe . Wire's got in the way for me .Seat is now so much EASYER to fit .Firt time every time .Before it was
"whats catching here ". I've thrown them .Can someone put a mouse in there so it can tell us how it all works .

The inside wire seem like a guide (that fails ) and DOES hook over those plastic hooks on the under side of the seat . I guess that DOES
mean they HELP holding the seat on . Are they needed , i dont think so . Seat is attached front and back ,that enough for me .
At least now i only have to locate the front tab and i get click,click every time from the back .
Am i the only one who found fitting the seat a bit hit or miss ?

I guess now i have to cut off those plastic hooks.

They work just fine on my bike when I've attached mine and my wifes helmets.

No real problem on mine... just make sure its all lined up and slides in and snap locks. Getting the helmet on the wire holder is a bit of an effort though sometimes...

Since ive removed those wires ,the helmet one didnt work on my Arai helmet and the seat goes on MUCH better without the other ones , with NO
ill effect .

I needed a way to secure my helmet .I have a bad time with keys and only like one in the ignition.If i have a key its only a matter of time before
i loose it, so thats out. Combination lock ? no more numbers please .

So i came up with this .Cost $0
I had a surfboard strap which had stainless steel cords in it so you carnt cut it easily .(hacksaw and vice will )


Bolt just needs to be finger tight (if that ) Can be adjusted with more holes .Bolt stays in webbing so wont get lost .If i loose the whole thing ,its no loss


Seat doesnt sit on the bolt head which looks like it would .Can now fit 2 helmets Arai's without swearing at the wires

When are you going into mass production Guss ? And how much will you sell them for on Flea Bay ?

Apiece of webbing and a old bolt ,mmmm , dont thing thats a winner .
This shot for some reason reminds me of school.