Spark plug wires

The wires going to the spark plug caps are .

1- Alarmingly thin and fragile looking and to feel

2-- Have no proper covering on them to hide the colours and protect the wires

3-- The orange grommet falls out and hides .

4-- But most of all number 2 ,3 ,and 4 are so SHORT they look like they were made for another bike.
I snipped the wires on them today so i could tidy up the wiring .When you snip 2 wires only 30 mm long you get 15 mm to work with .S|H design.I managed to make them about 90 mm and now have the wiring in the RIGHT places . Rotten job
Makes clipping them to the caps so much easier .

Never had a problem with them personally but I'm sure they will look much nicer now Gus.

How is the ECU going to know which is which if you've changed the wire colour and covered them up.

Trying to get a clean looking motor (top) but wires to short to move .

careful snipping wires Gus you might let the grey smoke out & then nothing works