Speedo illumination

Can any body tell me how to replace the instrument globes on a 1999 1200 bandit.

There either a pull out and replace type bulb or a LED none replacement type as on the 1250. Carnt remember .Hope for no LED'

I think i can remember going to an auto elec. and getting a two prong bulb type .Or was that a differant bike .

Thanks Gus,I actually meant how do you get inside the chrome cover to access the globe behind the speedo,Sorry my bad.

I'm sure I've removed the cover off the speedo without removing the fairing, you need to unscrew the speedo cable and there is a philips screw next to where the cable screws on ( in the recess) you can get to it by turning the steering to the right spot and working up under the fairing, it can be a bit fiddly getting it back in. All the instruments have a screw holding the back cover. I have a couple of manuals in pdf, 40 and 50 MB I can try and get them to you, probably too big as an attachment.

Thanks for the advice,Will try that ,Just wasn't sure as it is my first bandit and didn't want to pull apart or break things doin so.

Nudge......rule of thumb around here....."If at first you don't succeed.......you need a BIGGER hammer" .................Grumpy