Renthal bars.

Gidday,I am looking at fitting Renthal Road High bars #756-01 on a 2010 GSF1250S. Any prior installation mods,cable/hose length?

I've not done it , but here are the posts from those who have changed their bars ..........
https://nswbandits.forumotion.net/search?search_keywords=renthal+bars

You could always spacer up your bars with longer bolts if you only need a little more height .

Didn't do bars but used some risers instead. Only minor problem is now the right handle touches the screen (Zero Gravity,  a bit longer than stock) just before full left lock.
Only a parking problem .
No need to replace anything,  just removed lhs cable locater on frame in front of tank.
Bars came up 30 or 35 mm and back about 8mm due to following the angle on the way up.

I'll post while I can(I've asked to be deleted from the group), I can't speak for a 2010 but I did fit these bars to a '97 and I had to lengthen the brake pipe. They are a nice bar on the '97 and very comfortable positioning. 




If anyone has contact with 2wheelsagain(Chris), could you ask him to view his PM's please?

I fitted Renthal lows to my 1250, they’re a bit wider than the stock bars and I found it was a tight thing in terms of cable length on the right side. They got, but only just.

My new to me has Renthal lower and wider bars. It apears to be the same lines, I ordered Renthal highs because they are close to stock. I also have a set of risers laying around and if there is woom I will add those to.