Moving the reg.
+6
dhula
Reardo
2wheelsagain
Re-Cycled
Desert Bandito
gus
10 posters
Page 2 of 2
Page 2 of 2 • 
1, 2
Moving the reg.
gus Mon 09 May 2011, 4:50 pm
First topic message reminder :
Did the Reg. move made famous by Desert Bandito .It hid the wires nicely and kind of "fits".Needs a fine tune tomorrow.
Before
After
Did the Reg. move made famous by Desert Bandito .It hid the wires nicely and kind of "fits".Needs a fine tune tomorrow.
Before
After
gus- Posts : 6176
Join date : 2010-11-23
Age : 73
Location : Cygnet ,Tasmania
dhula- Posts : 1156
Join date : 2009-09-03
Location : Warnbro
Re: Moving the reg.
Reardo Sat 28 May 2011, 10:33 am
Mung beans???dhula wrote:mung beans is what your after whitey
_________________
2007 Bandit 1250sa Silver
*Open airbox lid with K&N.
*Removed Secondaries.
*HealTech Gear Indicator w/tre "Advanced Timing Retard Eliminator is needed".
*Balanced TB's. My TPS was fine, but you should check yours.
*Arrow race headers with Yoshimura TRS.
*PC3 with the supplied map and these mod got 123hp with 115nm of torque.
*Neville Lush Racing custom tune = 130hp with 125nm at the Tyre (Standard 98hp/108nm).
My youtube channel (clickhere)
Reardo- Posts : 2192
Join date : 2010-02-06
Age : 44
Location : BROKEN HILL -
Re: Moving the reg.
dhula Sat 28 May 2011, 6:59 pm
"peace love and mung beans baby"
A bit of a combo of the young ones (neil) and austin powers
A bit of a combo of the young ones (neil) and austin powers
dhula- Posts : 1156
Join date : 2009-09-03
Location : Warnbro
Re: Moving the reg.
Saikhan Sun 29 May 2011, 8:59 pm
Did this today. 37 minutes start to finish.
Since the photo I have moved the front down a bit to put the fins at about the same angle as the fins on the head.
I left it rubber mounted, as when I removed it I noticed it was rubber mounted. So I decided it was probably best to keep it that way.
Since the photo I have moved the front down a bit to put the fins at about the same angle as the fins on the head.
I left it rubber mounted, as when I removed it I noticed it was rubber mounted. So I decided it was probably best to keep it that way.
Saikhan- Posts : 765
Join date : 2010-01-19
Age : 58
Location : Gladstone Qld.
Re: Moving the reg.
Phill Sun 29 May 2011, 10:16 pm
What the!!!! the is bull sh1t, leave my mate 
Gus alone
Gus alone
Phill- Posts : 52
Join date : 2011-04-20
Age : 64
Location : Narangba QLD
Re: Moving the reg.
gus Mon 30 May 2011, 8:12 am
30 mins 
Took me hours .Did it end up looking anything like this .
Thanks Phill
The bracket .The hole in the middle is to put the wires through and let heat out.
In place.luckily you dont see it.
Took me hours .Did it end up looking anything like this .Thanks Phill
The bracket .The hole in the middle is to put the wires through and let heat out.
In place.luckily you dont see it.
gus- Posts : 6176
Join date : 2010-11-23
Age : 73
Location : Cygnet ,Tasmania
Re: Moving the reg.
dhula Mon 30 May 2011, 4:09 pm
Looks like yours is held on with one bolt Gus. If so, have you noticed that the bracket moves at all?
dhula- Posts : 1156
Join date : 2009-09-03
Location : Warnbro
Re: Moving the reg.
gus Sun 05 Jun 2011, 5:41 pm
Bracket doesnt move ,did put blue locktight on the metal thread though .No pressure on bracket so i'd be surprised if it moved.
gus- Posts : 6176
Join date : 2010-11-23
Age : 73
Location : Cygnet ,Tasmania
Re: Moving the reg.
Al Fentanyl Tue 07 Jun 2011, 11:37 pm
Thanks mate 
Your generosity is appreciated; good karma will come your way. Cheers
Your generosity is appreciated; good karma will come your way. Cheers
Al Fentanyl- Posts : 66
Join date : 2010-07-26
Page 2 of 2 • 1, 2
Similar topics» Moving on
» CMC Moving Sale
» moving to melbourne?
» Service /Repair /Moving trolley
» Spirit of Tasmania moving in Victoria
» CMC Moving Sale
» moving to melbourne?
» Service /Repair /Moving trolley
» Spirit of Tasmania moving in Victoria
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum