Front brakedisc torque
2 posters
Page 1 of 1
Front brakedisc torque
What is the recommended torque for mounting the front brakedisc on a GSX1250?
mikeswe- Posts : 20
Join date : 2012-07-14
Location : Sweden
From the service manual :-)
Installation
Install the front brake disc in the reverse order of
removal. Pay attention to the following points:
• Make sure that the brake discs are clean and free of
any grease.
• Apply thread lock to the brake disc bolts and tighten
them to the specified torque.
Tightening torque
Brake disc bolt (a): 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Install the front brake disc in the reverse order of
removal. Pay attention to the following points:
• Make sure that the brake discs are clean and free of
any grease.
• Apply thread lock to the brake disc bolts and tighten
them to the specified torque.
Tightening torque
Brake disc bolt (a): 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum