Dale's 1320cc Bandit kit
4 posters
Page 1 of 1
Dale's 1320cc Bandit kit
Reardo Fri 09 Jul 2010, 9:46 am
Copied from TWT forum
While attending Dale Walkers 3 day get together, BBQ and ride this last weekend at his new place up in Yerington NV, Dale had his first article parts laid out for his new 1320 big bore kit, cams and ported head for the 1250 that we all got to droll over.
Dales said is hoping for 160+ hp with all of the above along with his stage II kit, secondaries removed, slip on and headers.
The cylinders have been bored out and re-plated with Nikasil along with special grind Web cams and custom made for Dale JE pistons and a custom ported head. These are going on a second 1250 motor that Dale picked up on eBay awhile back, and once assembled will get installed into his 1250 test mule for testing and tweaking and even more dyno runs.
Just to the left of this bench was Dales test mule 1250 that has over 600 dyno runs on it, and on which I was installing a few of my parts on that Dale is going to start carrying on his website shortly which I'm really excited about.
While attending Dale Walkers 3 day get together, BBQ and ride this last weekend at his new place up in Yerington NV, Dale had his first article parts laid out for his new 1320 big bore kit, cams and ported head for the 1250 that we all got to droll over.
Dales said is hoping for 160+ hp with all of the above along with his stage II kit, secondaries removed, slip on and headers.
The cylinders have been bored out and re-plated with Nikasil along with special grind Web cams and custom made for Dale JE pistons and a custom ported head. These are going on a second 1250 motor that Dale picked up on eBay awhile back, and once assembled will get installed into his 1250 test mule for testing and tweaking and even more dyno runs.
Just to the left of this bench was Dales test mule 1250 that has over 600 dyno runs on it, and on which I was installing a few of my parts on that Dale is going to start carrying on his website shortly which I'm really excited about.
_________________
2007 Bandit 1250sa Silver
*Open airbox lid with K&N.
*Removed Secondaries.
*HealTech Gear Indicator w/tre "Advanced Timing Retard Eliminator is needed".
*Balanced TB's. My TPS was fine, but you should check yours.
*Arrow race headers with Yoshimura TRS.
*PC3 with the supplied map and these mod got 123hp with 115nm of torque.
*Neville Lush Racing custom tune = 130hp with 125nm at the Tyre (Standard 98hp/108nm).
My youtube channel (clickhere)
Reardo- Posts : 2192
Join date : 2010-02-06
Age : 44
Location : BROKEN HILL -
Re: Dale's 1320cc Bandit kit
Cameron Fri 09 Jul 2010, 6:39 pm
Im excited too 
_________________
<<Real men ride naked>>
Cameron- Admin
- Posts : 1674
Join date : 2009-08-19
Age : 33
Location : Penrith
Dekenai- Posts : 797
Join date : 2009-09-02
Location : Tuggers, ACT
Re: Dale's 1320cc Bandit kit
potatomasher Sat 10 Jul 2010, 5:06 pm
i can only see pistons, a block and valve gear - no horn 
potatomasher- Posts : 854
Join date : 2009-08-24
Age : 67
Location : northern beaches -
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|