renthal ultra lows
4 posters
Page 1 of 1
renthal ultra lows
hello folks ,just have a question does anyone know if the renthal ultra lows would be a good fit for the 07 1250 any issues with cable lengths and clearance at full turn
Thx in advance
Thx in advance
_________________
say what you mean and mean what you say
the bandit- Posts : 9
Join date : 2013-01-11
Re: renthal ultra lows
I had them on my 1200 and then tranferred them onto my 1250 when I traded up. No issues in clearence. Being slightly lower the cables are plenty long enough. They are a little bit wider than std. And this is where you feel the most benefit. I feel that the bike/bikes turn in much easier and are much better to flick around. I got some other bar ends to replace the originals. You can refit the originals with a bit of a revamp. The alloy bars are nice to the feel. No vibration through them. A little flex which is fine. Having used them, I would not change over to anything else . Try them out. They are not expensive.
Hammy- Posts : 4446
Join date : 2011-08-09
Age : 64
Location : The Rock
Re: renthal ultra lows
Fit well on my naked .
gus- Posts : 6176
Join date : 2010-11-23
Age : 73
Location : Cygnet ,Tasmania
Re: renthal ultra lows
_________________
2007 Bandit 1250sa Silver
*Open airbox lid with K&N.
*Removed Secondaries.
*HealTech Gear Indicator w/tre "Advanced Timing Retard Eliminator is needed".
*Balanced TB's. My TPS was fine, but you should check yours.
*Arrow race headers with Yoshimura TRS.
*PC3 with the supplied map and these mod got 123hp with 115nm of torque.
*Neville Lush Racing custom tune = 130hp with 125nm at the Tyre (Standard 98hp/108nm).
My youtube channel (clickhere)
Re: renthal ultra lows
thanks didn't realize next time will use the search
_________________
say what you mean and mean what you say
the bandit- Posts : 9
Join date : 2013-01-11
Re: renthal ultra lows
No probsthe bandit wrote:thanks didn't realize next time will use the search
_________________
2007 Bandit 1250sa Silver
*Open airbox lid with K&N.
*Removed Secondaries.
*HealTech Gear Indicator w/tre "Advanced Timing Retard Eliminator is needed".
*Balanced TB's. My TPS was fine, but you should check yours.
*Arrow race headers with Yoshimura TRS.
*PC3 with the supplied map and these mod got 123hp with 115nm of torque.
*Neville Lush Racing custom tune = 130hp with 125nm at the Tyre (Standard 98hp/108nm).
My youtube channel (clickhere)
Re: renthal ultra lows
BTW reardo.... nice vids on that youtube channel you are quite handy wrenching
_________________
say what you mean and mean what you say
the bandit- Posts : 9
Join date : 2013-01-11
Re: renthal ultra lows
You should see me with a wench then! I get pay for them videos.the bandit wrote:BTW reardo.... nice vids on that youtube channel you are quite handy wrenching
Thank mate. My dad didn't like fixing my push bikes for me all the time, So he showed me how and so on through life.
Oh and with people like Dhula, Reddog, barry_mcki, etc, etc. Mods are a lot easier for the first timers with step by step threads.
_________________
2007 Bandit 1250sa Silver
*Open airbox lid with K&N.
*Removed Secondaries.
*HealTech Gear Indicator w/tre "Advanced Timing Retard Eliminator is needed".
*Balanced TB's. My TPS was fine, but you should check yours.
*Arrow race headers with Yoshimura TRS.
*PC3 with the supplied map and these mod got 123hp with 115nm of torque.
*Neville Lush Racing custom tune = 130hp with 125nm at the Tyre (Standard 98hp/108nm).
My youtube channel (clickhere)
Re: renthal ultra lows
[quote="Reardo"]
Do we call you by your screen name now ? " Reardo Dangler "
You should see me with a wench then! I get pay for them videos.the bandit wrote:BTW reardo.... nice vids on that youtube channel you are quite handy wrenching
Do we call you by your screen name now ? " Reardo Dangler "
Hammy- Posts : 4446
Join date : 2011-08-09
Age : 64
Location : The Rock
Re: renthal ultra lows
Hammy wrote:Reardo wrote:You should see me with a wench then! I get pay for them videos.the bandit wrote:BTW reardo.... nice vids on that youtube channel you are quite handy wrenching
Do we call you by your screen name now ? " Reardo Dangler "
>>>>>>>>>>>>>Hammy do not delete the end quote.<<<<<<<<<<<<<<<<<
They look like this: To start
and this one at the end" Reardo Dangler "
Looks like this:
_________________
2007 Bandit 1250sa Silver
*Open airbox lid with K&N.
*Removed Secondaries.
*HealTech Gear Indicator w/tre "Advanced Timing Retard Eliminator is needed".
*Balanced TB's. My TPS was fine, but you should check yours.
*Arrow race headers with Yoshimura TRS.
*PC3 with the supplied map and these mod got 123hp with 115nm of torque.
*Neville Lush Racing custom tune = 130hp with 125nm at the Tyre (Standard 98hp/108nm).
My youtube channel (clickhere)
Re: renthal ultra lows
Reardo wrote:Hammy wrote:Reardo wrote:You should see me with a wench then! I get pay for them videos.the bandit wrote:BTW reardo.... nice vids on that youtube channel you are quite handy wrenching
Do we call you by your screen name now ? " Reardo Dangler "
>>>>>>>>>>>>>Hammy do not delete the end quote.<<<<<<<<<<<<<<<<<
They look like this: To startand this one at the end" Reardo Dangler "
Looks like this:
My Sincerest Apologise.
Hammy- Posts : 4446
Join date : 2011-08-09
Age : 64
Location : The Rock
Re: renthal ultra lows
Apology accepted
_________________
2007 Bandit 1250sa Silver
*Open airbox lid with K&N.
*Removed Secondaries.
*HealTech Gear Indicator w/tre "Advanced Timing Retard Eliminator is needed".
*Balanced TB's. My TPS was fine, but you should check yours.
*Arrow race headers with Yoshimura TRS.
*PC3 with the supplied map and these mod got 123hp with 115nm of torque.
*Neville Lush Racing custom tune = 130hp with 125nm at the Tyre (Standard 98hp/108nm).
My youtube channel (clickhere)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|