Wanted: Factory 1250 Headers
5 posters
Page 1 of 1
Wanted: Factory 1250 Headers
Hi All,
I'm in the process of tidying up my Bandit, and I'm after a decent set of original headers that someone might have laying around after upgrading. Mine have a dent in them and are in pretty poor condition.
I'm also looking for a set of straight forks and radiator, although I can probably get these repaired for less than the cost of replacing them.
I was originally planning to upgrade to Arrows + PC + Front Suspension mods but I can't justify the cost at the moment. With rego/CTP costing me about $1,300 a year (no comp cover), I'm actually tempted to sell it and go to something with a smaller capacity (like a DRZ400SM), where rego + full comp is more like $750.
Let me know what you've got and how much you want for it.
P.S If anyone wants to make an offer on my bike as is, it has 45,000kms. Not saying I'll sell it, but could be tempted.
I'm in the process of tidying up my Bandit, and I'm after a decent set of original headers that someone might have laying around after upgrading. Mine have a dent in them and are in pretty poor condition.
I'm also looking for a set of straight forks and radiator, although I can probably get these repaired for less than the cost of replacing them.
I was originally planning to upgrade to Arrows + PC + Front Suspension mods but I can't justify the cost at the moment. With rego/CTP costing me about $1,300 a year (no comp cover), I'm actually tempted to sell it and go to something with a smaller capacity (like a DRZ400SM), where rego + full comp is more like $750.
Let me know what you've got and how much you want for it.
P.S If anyone wants to make an offer on my bike as is, it has 45,000kms. Not saying I'll sell it, but could be tempted.
Sloth_27- Posts : 227
Join date : 2009-08-20
Age : 34
Location : NSW
Re: Wanted: Factory 1250 Headers
Who is your CTP with???
My CTP came in today, $511. I am guessing rego will about $300, but need to wait for that.
My CTP came in today, $511. I am guessing rego will about $300, but need to wait for that.
Tsim- Posts : 113
Join date : 2012-12-31
Age : 52
Re: Wanted: Factory 1250 Headers
I have a spare set of headers you can have .
gus- Posts : 6176
Join date : 2010-11-23
Age : 73
Location : Cygnet ,Tasmania
Re: Wanted: Factory 1250 Headers
Doesn't really make a difference, prices are all within $20 of each other. NSW Greenslips are expensive to start with for a 1250cc bike and I'm only 24, so it alone is $990. And it increases every year as the bike gets older.Tsim wrote:Who is your CTP with???
My CTP came in today, $511. I am guessing rego will about $300, but need to wait for that.
Thanks for the offer Gus, but probably need a set local from NSW to make it worthwhile.gus wrote:I have a spare set of headers you can have .
Sloth_27- Posts : 227
Join date : 2009-08-20
Age : 34
Location : NSW
Re: Wanted: Factory 1250 Headers
So Sloth did buy a bent bike or did you bend yours
Jimcoleman- Posts : 1179
Join date : 2011-08-03
Age : 56
Location : Merimbula , NSW
Re: Wanted: Factory 1250 Headers
I bought the bike new. The bent radiator and dented header are from my big crash in 2010 (?), everything else was repaired or replaced with new parts.Jimcoleman wrote:So Sloth did buy a bent bike or did you bend yours
The forks have a minute bend in them from a stupid mistake where I ran into the back of a car on the way to work. Was very low speed and I've ridden around with them like that for about 2 years but I wouldn't sell it to someone like that.
If it goes up for sale it will most likely be the cheapest 1250 on the market.
Sloth_27- Posts : 227
Join date : 2009-08-20
Age : 34
Location : NSW
Re: Wanted: Factory 1250 Headers
Did you buy the DRZ ? .......................maybe time for a forum name change with all the variety of bikes in the forum nowSloth_27 wrote:I bought the bike new. The bent radiator and dented header are from my big crash in 2010 (?), everything else was repaired or replaced with new parts.Jimcoleman wrote:So Sloth did buy a bent bike or did you bend yours
The forks have a minute bend in them from a stupid mistake where I ran into the back of a car on the way to work. Was very low speed and I've ridden around with them like that for about 2 years but I wouldn't sell it to someone like that.
If it goes up for sale it will most likely be the cheapest 1250 on the market.
_________________
Four wheels move the body. Two wheels move the soul.
paul- Posts : 7738
Join date : 2011-08-19
Age : 71
Location : Morphett Vale Sth. Aust.
Re: Wanted: Factory 1250 Headers
no mate mine was the cheapest 1250 on the marketSloth_27 wrote:I bought the bike new. The bent radiator and dented header are from my big crash in 2010 (?), everything else was repaired or replaced with new parts.Jimcoleman wrote:So Sloth did buy a bent bike or did you bend yours
The forks have a minute bend in them from a stupid mistake where I ran into the back of a car on the way to work. Was very low speed and I've ridden around with them like that for about 2 years but I wouldn't sell it to someone like that.
If it goes up for sale it will most likely be the cheapest 1250 on the market.
Jimcoleman- Posts : 1179
Join date : 2011-08-03
Age : 56
Location : Merimbula , NSW
Similar topics
» 1250 Headers
» Shock Treatment
» Wanted 1250 brake hose .
» Wanted : 1250 standard seat
» Wanted 1250 bandit exhaust
» Shock Treatment
» Wanted 1250 brake hose .
» Wanted : 1250 standard seat
» Wanted 1250 bandit exhaust
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|