2014 GSX FA 1250 Pillion Pegs Positioning

View previous topic View next topic Go down

2014 GSX FA 1250 Pillion Pegs Positioning

Post  SouthCoastTrav on Sun 03 May 2015, 8:29 pm

Yep, I know its been asked before and there are some great ideas and solutions here

Has anyone had any success with altering the positioning of the pillion pegs WITHOUT cutting or modifying anything on the bike. I don't really want to cut or shape or bend anything and want to move (somehow) the pillion pegs down, forward and if possible, out away from the bike.

The reason for out is because of the exhaust. I have removed the stock pipe and replaced with a nice half CF half ali Yoshi (sounds nice without being over powering) Obviously the standard exhaust mount bracket on the right peg needs to stay, without cutting or modifying anything seriously but I'm curious about these 360 pegs I see around. I've seen 40mm extended drop pegs but do they extend out away from the bike enough to avoid the pipe?

Any suggestions would be much appreciated
avatar
SouthCoastTrav

Posts : 4
Join date : 2015-05-03

View user profile

Back to top Go down

Re: 2014 GSX FA 1250 Pillion Pegs Positioning

Post  Chook on Sun 03 May 2015, 8:54 pm

avatar
Chook

Posts : 3003
Join date : 2012-01-20
Age : 52
Location : Between the City and Beach, Adelaide

View user profile https://www.facebook.com/groups/154520904856/?fref=ts

Back to top Go down

Re: 2014 GSX FA 1250 Pillion Pegs Positioning

Post  NZspokes on Wed 06 May 2015, 8:21 pm


I copied this on our 1200 and its perfect. I fully recommend it.
avatar
NZspokes

Posts : 390
Join date : 2012-06-02

View user profile

Back to top Go down

Re: 2014 GSX FA 1250 Pillion Pegs Positioning

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum